Carton machine maintenance is the static and dynamic maintenance of the machine. Under the condition of unified time, the machine can be opened for static level detection and dynamic operation. For such machines, the lubrication is low, especially for sliding bearings with high lubrication effect at point start or low speed. Reducing the printing pressure (generalized pressure) to ensure the smooth operation of the machine is an important premise. Under the condition of printing pressure, the printing quality may be more beautiful. The above routine maintenance is only the maintenance of the printing machine. The high or low quality of the daily maintenance of the printing machine in this department directly affects the service life of the printing machine and product quality, so we can't take it lightly.

1. Influence of machine control process. The impact of a small month in which the process of the printing machine is running can also prolong the service life of the machine. Some machines drive the pump through the main engine, so when the point is, not only can it not come to the oil, it will suck the oil into the oil tank, which is often dangerous, so this should be avoided. Although it is easy to observe oil leakage, it is often difficult to find out the cause.

2. Lubrication status of the machine. This machine is a dynamic and important carton printing machine. The main contents of dynamic maintenance:

3. Preparation for mechanical condition detection. Such as tools and other items, the installation position of machine card and printing board is appropriate. If it is not suitable, the board may be damaged or the rules may bring great problems; The installation of rubber cloth is appropriate. If it is not suitable, it may lead to printing failure, and the rubber leather cloth or machine may be damaged in severe cases. It may first be through observation, such as oil, or the oil engine fuel pipeline with clear scale when observing the free scale of oil standard oil. At present, it is not clear, so it should stop urgently and carefully check whether there is oil leakage. The lubrication of more important departments also passes the lubrication of the metals around them, such as the temperature transition is too high and the temperature test table has problems.